Licensed plumbers for kitchen and bathroom faucet installs
Faucet Installation in Tupelo, MS Done Right the First Time
When you need faucet installation Tupelo MS homeowners trust, our licensed team handles everything from supply lines to shut-off valves. We install kitchen and bathroom faucets in homes across Lee County, usually in under three hours. Whether your old fixture is leaking or you're upgrading to a Moen or Delta model, we make sure the job is code-correct and leak-free before we leave.
Live phone supportUpfront optionsBacked workmanship
What's included
What our faucet installation includes
Every faucet installation we do covers the full job: removal of the old fixture, installation of the new one, and testing. We also inspect and replace worn supply lines or shut-off valves when needed, so you don't have to call us back for a leak.
Old faucet removal
We disconnect and remove your old faucet, including the supply lines and drain assembly. We clean the mounting surface and check the countertop hole for damage. The old fixture is hauled away.
New faucet installation
We mount your new faucet with a fresh gasket, connect braided supply lines, and attach the drain. For kitchen faucets, we install the sprayer and weight. We follow manufacturer torque specs.
Supply line and valve check
We inspect the shut-off valves and supply lines under the sink. If they're corroded or seized, we replace them with new quarter-turn valves and braided lines. This prevents future leaks.
Leak test and pressure check
After turning the water on, we run hot and cold for two minutes and check every connection with a dry paper towel. We also test the sprayer, soap dispenser, and drain for proper flow.
Cleanup and walkthrough
We wipe down the sink and cabinet, haul away the old faucet and packaging, and show you how to operate your new fixture. You get a chance to ask questions before we leave.
Service overview
Professional faucet installation Tupelo MS
Faucet installation Tupelo MS is the licensed trade of removing an old fixture and mounting, sealing, and connecting a new faucet to your home's water supply and drain lines. It involves shutting off water, disconnecting supply lines, cleaning the mounting surface, setting the new faucet with plumber's tape or a gasket, and pressure-testing every connection. We handle kitchen, bathroom, and utility faucets, and we work with all major brands including Moen, Delta, Kohler, and American Standard.
Tupelo homes deal with hard water that wears out cartridges and seals faster than most homeowners expect. A dripping faucet wastes hundreds of gallons a month and can stain sinks or rot cabinet bases. If you've been searching for faucet installation near me Tupelo MS, we can usually schedule same-day service. We also replace corroded shut-off valves and worn supply lines while we're under the sink, so your new faucet starts with a clean, reliable connection.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
Our faucet installation process
The process flexes to the condition, but these checkpoints keep decisions clear.
Call and schedule
Call (662) 550-8327 or book online. We ask what type of faucet you have and whether you already bought a replacement. Most Tupelo addresses get a same-day or next-morning window. You'll get a text when the technician is on the way.
Shut off and inspect
We shut off the angle stops under the sink. If they're seized or corroded, we replace them before starting. We check the supply lines, drain assembly, and cabinet floor for old leaks. This takes about 10 minutes and prevents surprises later.
Remove old faucet
Using a basin wrench and pipe cutter when needed, we disconnect the old faucet and pull it out. We clean the mounting surface and remove old plumber's tape or putty. If the countertop hole is damaged, we note it and recommend a fix before installing.
Install new fixture
We set the new faucet with a new gasket, connect braided supply lines, and hand-tighten all fittings. For kitchen faucets with pull-down sprayers, we weight the hose and test retraction. We follow the manufacturer's torque specs and use plumber's tape on threaded connections.
Test and clean up
We turn the water back on, run hot and cold for two minutes, and check every connection with a dry paper towel. You get a walkthrough of the new faucet's features. We haul away the old fixture and leave the cabinet as clean as we found it.
Tools & methods
Tools and methods we use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Basin wrench
Used to reach and turn mounting nuts in tight spaces under the sink. Essential for removing and installing faucets without damaging the cabinet.
Pipe wrench
For gripping and turning supply lines and shut-off valves. We use it to replace corroded angle stops and ensure tight connections.
Pipe cutter
Cuts copper or PEX supply lines cleanly when we need to replace a section. It gives a square edge for proper fitting connections.
Press fitting tool
For making secure connections on copper or PEX without soldering. It's faster and safer, especially in tight cabinets where a torch is risky.
Plumber's tape
Wrapped on threaded connections to create a watertight seal. We use it on supply line threads and shower arm connections.
Leak detection equipment
Used to check for hidden leaks after installation. We also use it to diagnose supply line issues that affect faucet pressure.
Use cases
When to schedule faucet installation
These examples show how the service framework adapts rather than forcing every call through one repair.
Bathroom faucet replacement in Bel Air
The original bathroom faucet had a drip that stained the sink basin. The handles were hard to turn and the finish was worn. The homeowner wanted a modern look. → We installed a new Delta widespread faucet with ceramic valves. The drip stopped, the handles turn smoothly, and the new finish brightened the bathroom. Installation took 90 minutes.
Utility sink faucet in Chesterville
A garage utility sink had a leaky faucet that sprayed water when turned on. The supply lines were cracked and the shut-off valve was stuck open. → We installed a heavy-duty American Standard utility faucet and replaced the supply lines and valve. The leak stopped, and the faucet now delivers strong flow for filling buckets. Done in one hour.
Pick the right fit
Faucet Styles We Install
Faucet installation starts with the sink's hole count and spacing. We install 5 common faucet styles in Tupelo kitchens and bathrooms.
Single-Hole Faucets
One handle and spout through a single hole. A deck plate covers extra holes on a 3-hole sink.
Centerset Faucets
Two handles and a spout on one base over 4-inch (10 cm) spaced holes, common on bathroom vanities.
Widespread Faucets
Separate handles and spout over holes 8 to 16 inches (20 to 40 cm) apart for a larger vanity.
Pull-Down Kitchen Faucets
A spray head on a weighted hose. We check the hose clearance under the sink and around the disposal.
Touchless Faucets
Motion-sensor faucets that run on batteries or a plug-in adapter. We mount the control box clear of water lines.
Problems we solve
Faucet problems we solve in Tupelo
A failing faucet wastes water, stains sinks, and can damage cabinets. We fix the root cause and install a fixture that lasts.
Leaky faucet dripping day and night
We replace the faucet and inspect the supply lines and shut-off valves. If the leak is from a worn cartridge, we can often repair it, but if the fixture is old, a new Moen or Delta faucet is the better long-term fix.
Low water pressure at the kitchen sink
We remove and clean the aerator, check the cartridge, and test the shut-off valves. If the pressure drop is due to corroded galvanized pipes, we can replace that section with PEX or copper and install your new faucet.
Corroded shut-off valves under the sink
We replace worn angle stops with new quarter-turn valves as part of the installation. This gives you reliable shut-off control and prevents future leaks. We carry common sizes on the truck.
Faucet that doesn't match sink holes
We check your sink's hole count and spread before you buy, or we can adapt with a deck plate. If you already bought the wrong one, we'll tell you and help you exchange it. We install to code and manufacturer specs.
Pricing process
Faucet installation cost in Tupelo
$150 - $450 for labor, plus parts if needed
Faucet type
A basic bathroom faucet takes less time than a kitchen faucet with a pull-down sprayer and soap dispenser. Touchless or commercial-grade models may require additional setup.
Accessibility
If the sink is in a tight cabinet or the shut-off valves are hard to reach, the job takes longer. We may need to remove a drawer or use specialized tools, which adds labor time.
Supply lines and valves
If your existing supply lines or shut-off valves are corroded or damaged, we replace them. New braided lines and quarter-turn valves add $30 to $80 in parts and labor.
Customer reviews
What Tupelo customers say
★★★★★
“Our kitchen faucet had been dripping for months. TupelomsPlumbing came out the same day I called, replaced the faucet and both shut-off valves, and even cleaned up the cabinet. The new Moen works perfectly and the price was exactly what they quoted. I'll use them again for the bathroom.”
★★★★★
“I bought a Delta faucet online and needed it installed. They showed up on time, found a missing gasket in the box, and had one on the truck. The install took about an hour and a half. No leaks, no mess. Fair price for Tupelo.”
★★★★★
“The bathroom faucet in our 1950s house was original and corroded. They replaced it and the old shut-off valves, which were stuck. The plumber explained everything and showed me how to use the new handles. Very professional and respectful of our old home.”
How much does faucet installation cost in Tupelo MS?
Most faucet installations in Tupelo run $150 to $450 for labor, depending on the faucet type and whether we replace supply lines or shut-off valves. A basic bathroom faucet is on the lower end; a kitchen faucet with a pull-down sprayer and new angle stops is higher. If you supply the faucet, you save the markup. We give you a flat price before we start.
How long does faucet installation take in Tupelo Mississippi?
A standard faucet swap takes one to two hours. Kitchen faucets with sprayers or soap dispensers can take two to three hours. If we find corroded shut-off valves or damaged supply lines, add 30 to 45 minutes. We schedule same-day appointments and usually finish before lunch or early afternoon.
Can you install a faucet I bought in Tupelo?
Yes. We install customer-supplied faucets from Moen, Delta, Kohler, American Standard, and other brands. We check that all parts, gaskets, and mounting hardware are in the box. If something's missing, we'll let you know before we start. You get the same workmanship warranty on the installation, though the fixture warranty stays with the manufacturer.
Do you install kitchen faucets in Tupelo MS?
We install kitchen faucets every day in Tupelo and across Lee County. That includes pull-down, pull-out, touchless, and traditional dual-handle models. We handle the supply lines, drain connections, and any necessary countertop hole adjustments. If you're upgrading to a WaterSense fixture, we'll make sure it's set up for optimal flow.
How do I know which faucet fits my sink?
A faucet fits your sink when its hole count and spacing match the sink or countertop. Count the holes under the sink and measure center to center. A single-hole faucet fits a 3-hole sink with a deck plate.
Should I replace the shut-off valves when installing a new faucet?
Yes, replace the shut-off valves when they are corroded, stuck, or older multi-turn valves. A new quarter-turn valve and braided supply line cost little next to a leak under a new cabinet.
Related services
Other plumbing services we offer in Tupelo
Emergency Plumbing
A burst supply line during a faucet swap can flood a cabinet fast. Our emergency plumbers in Tupelo respond 24/7 to shut off water, repair the line, and finish the faucet installation once the leak is fixed.
Residential Plumbing
Faucet installation is part of our full residential plumbing service in Tupelo. We handle everything from leaky faucets to repiping, so you have one licensed team for all your home's plumbing needs.
Commercial Plumbing
We install commercial-grade faucets in Tupelo restaurants, offices, and retail spaces. These fixtures see heavy use, so we spec models with ceramic cartridges and install them to code for health inspections.Ready when you are
Schedule your faucet installation Tupelo MS today
Call (662) 550-8327 and we'll get a licensed plumber to your door, often the same day. We'll install your faucet, test every connection, and leave the cabinet clean. Licensed, insured, and warrantied.
Talk with the local team
Request Faucet Installation
Call (662) 550-8327 to reach a live dispatcher. We answer 24/7 for emergencies and book same-day appointments Monday through Friday. If you prefer email, send your address and a description of the problem to info@tupelomsplumbing.com and we will reply with an arrival window.