
Licensed, insured, and ready for same-day service
Faucet Repair in Tupelo, MS Done Right the First Time
When a faucet drips, you feel it on your water bill and hear it at 2 a.m. We handle faucet repair Tupelo MS homeowners and business owners can count on, from kitchen faucet repair to bathroom fixtures. Our licensed team serves Lee County with 25+ years of local experience, upfront pricing, and a workmanship warranty on every repair.
What's included
What our faucet repair service includes
Every faucet repair we do covers the full job, not just the obvious part. Here is what you get when you book us for a repair in Tupelo.
Full faucet disassembly
We take the faucet apart completely to inspect the cartridge, O-rings, seals, and valve seat. This lets us find the real cause of the leak instead of guessing and replacing parts that are still good.
Replacement parts
We install new cartridges, seals, and O-rings from Moen, Delta, Kohler, or American Standard. We carry these on the truck, so most repairs are completed in a single visit without waiting on a special order.
Supply line inspection
While we are under the sink, we check the supply lines and shut-off valves for corrosion or leaks. If something looks like it will fail soon, we tell you and can replace it during the same visit.
Leak test and pressure check
After the repair, we turn the water on and run the faucet hot and cold. We check for drips, leaks under the sink, and proper water pressure. You see it working before we leave.
Cleanup and warranty
We wipe down the sink area and put everything back the way we found it. You get a workmanship warranty on the repair, so if the same issue comes back, we return at no charge.
Service overview
What faucet repair Tupelo MS actually involves
Faucet repair Tupelo MS is the trade of diagnosing and fixing the internal parts that make a faucet leak, drip, or lose pressure. We take apart the fixture, inspect the cartridge, O-rings, seals, and valve seats, then replace only what has failed. Most repairs use Moen, Delta, or Kohler replacement parts we keep on the truck, so we finish in one visit instead of ordering and returning. If the faucet is older or corroded, we tell you straight whether a repair or a full replacement makes more sense.
Tupelo homes deal with hard water that wears out rubber seals faster than in softer-water regions, so leaky faucet repair Tupelo MS calls come in year-round. Older houses near Downtown Tupelo and Mill Village often have original fixtures with worn cartridges, while newer builds in Willow Creek and Oakview tend to have ceramic disc valves that fail differently. We also see supply line corrosion behind the wall, which is why we check shut-off valves and connections while we are already under the sink.
The service timeline
How our faucet repair process works
The process flexes to the condition, but these checkpoints keep decisions clear.
Call and schedule
You call (662) 550-8327 and tell us what the faucet is doing. We ask a few questions to figure out whether it is a cartridge, a seal, or a supply line issue. We book a window that works for you, usually same-day or next morning.
On-site diagnosis
A licensed technician arrives, shuts off the water, and takes the faucet apart. We inspect the cartridge, O-rings, valve seat, and supply lines. You get a clear explanation of what failed and what it costs to fix before we touch anything.
Repair or replace
If the cartridge or seals are the problem, we swap them out with matching parts from Moen, Delta, or Kohler. If the valve body is cracked or corroded, we walk you through replacement options. Most repairs are done in 45 to 90 minutes.
Test and verify
We turn the water back on and run the faucet hot and cold. We check for drips, leaks under the sink, and proper water pressure. If anything is off, we fix it before we pack up. You see it working before we leave.
Clean up and warranty
We wipe down the sink area, put everything back, and hand you a workmanship warranty on the repair. If the same issue comes back within the warranty period, we return at no charge. That is how we do business in Tupelo.
Tools & methods
Tools and methods we use for faucet repair
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Pipe wrench
Used to loosen and tighten supply line connections and shut-off valves under the sink without damaging the fittings.
Leak detection equipment
Helps us find hidden leaks behind walls or under the cabinet that are not visible during a standard inspection.
Pipe cutter
Cuts copper piping or PEX piping cleanly when a supply line needs to be replaced during the repair.
Soldering torch
Used to sweat copper piping when we need to repair or replace a section of supply line.
Press fitting tool
Makes secure connections on PEX piping and copper piping without needing to solder, which is faster and safer.
RIDGID diagnostic tools
We use RIDGID equipment to inspect valves and supply lines to confirm the repair is done right.
Use cases
When to call us for faucet repair
These examples show how the service framework adapts rather than forcing every call through one repair.

Bathroom faucet leak fixed before closing
A real estate agent in East Tupelo called us because a home inspection flagged a leaky bathroom faucet. The seller needed it fixed before closing, and the buyer was already scheduled for a final walkthrough in three days. → We replaced the O-rings and seals on the Delta faucet the same day. The leak stopped, and we provided a receipt for the repair. The closing went through on schedule, and the buyer did not have to ask for a credit.
Commercial kitchen faucet back in service
A restaurant near West Main had a pre-rinse sprayer faucet that stopped working during the lunch rush. The staff was using a backup sink, which slowed down dishwashing and food prep. They needed it fixed fast. → We arrived within two hours of the call and replaced the sprayer valve and hose. The faucet was back in service before the dinner rush. The owner said the quick repair saved them from closing early and losing revenue.
Know your faucet
4 Faucet Types and How Each One Fails
Kitchen and bathroom faucets come in 4 valve types. The valve type tells us which part wore out and which repair kit fits.
Compression Faucets
Two handles that tighten down on a rubber washer. A drip means a worn washer or valve seat, the cheapest faucet repair there is.
Cartridge Faucets
One or two handles with a sliding cartridge. Moen and many Delta models use cartridges, and a new cartridge stops most drips.
Ball Faucets
A single handle over a rotating ball with springs and seals. Leaks at the spout point to worn seats and springs.
Ceramic Disc Faucets
Two ceramic discs that slide over each other. Discs last decades, but hard-water scale and grit wear the seals.
Problems we solve
Faucet problems we fix for Tupelo homeowners
Most faucet issues start small and get worse. Here are the problems we solve every week in Tupelo and across Lee County.
Faucet drips constantly, even when turned off
We replace the worn cartridge or O-ring causing the drip. Most repairs take under two hours, and we test the faucet hot and cold before we leave. Your water bill stops climbing and the noise stops.
Low water pressure at the kitchen faucet
We remove and clean the aerator, check the supply lines, and test the shut-off valves. If the issue is in the valve, we replace it. You get full pressure back at the tap, usually in one visit.
Water leaks from the base of the faucet
We replace the O-rings and seals at the base of the faucet. If the valve body is cracked, we walk you through replacement options. We dry the area and test for leaks before we leave.
Faucet handle is stiff or hard to turn
We take the handle apart, clean out the mineral buildup, and replace the cartridge if needed. We use parts from Moen, Delta, or Kohler to match your fixture. The handle moves smoothly again.
Pricing process
Faucet repair cost in Tupelo
$150 - $350 for most standard faucet repairs; higher for specialty fixtures or emergency calls
Faucet brand and model
Parts for Moen, Delta, and Kohler are widely available, so repairs are usually on the lower end. Specialty or imported faucets may need a special-order part, which adds time and cost.
Type of failure
A worn cartridge or O-ring is a quick fix. A cracked valve body or corroded supply line takes longer and may need additional parts, which increases the cost.
Accessibility
If the shut-off valve is stuck or the space under the sink is tight, the job takes longer. We handle these situations regularly and will tell you upfront if access is an issue.
Customer reviews
What Tupelo customers say
“Our kitchen faucet had been dripping for months and I finally called. The technician showed up the same afternoon, took the faucet apart, and had a new cartridge in within an hour. He also checked the supply lines and tightened a loose connection under the sink. No more drip, no more water waste. Fair price and no mess left behind.”
“The bathroom faucet in our older house was leaking around the base. I figured it would need a full replacement, but they repaired it instead. The plumber had the right Delta parts on his truck and finished in about 45 minutes. He explained what caused the leak and how to keep it from happening again. Honest work.”
“I manage several rental properties in Tupelo and use TupelomsPlumbing.com for all the faucet repairs. They are quick to schedule, the pricing is upfront, and they always clean up after themselves. The tenants have never complained about the work. That is worth a lot when you are managing multiple units.”
How much does faucet repair cost in Tupelo MS?
Most faucet repairs in Tupelo run $150 to $350, depending on the brand and what failed. A simple cartridge swap on a Moen or Delta kitchen faucet is on the lower end. A bathroom faucet with corroded valve seats or a broken supply line runs higher. We give you the exact price before we start work.
Why is my faucet dripping in Tupelo Mississippi?
The most common cause is a worn cartridge or O-ring inside the faucet handle. Tupelo's hard water wears these rubber and plastic parts down faster than in softer-water areas. A drip that starts small will get worse and waste thousands of gallons a year. We replace the failed part and stop the leak.
Can you repair a leaky faucet in Tupelo?
Yes. We repair leaky faucets every day in Tupelo and across Lee County. We carry replacement cartridges, seals, and supply lines for Moen, Delta, Kohler, and American Standard on our trucks. Most leaky faucet repairs take under two hours and come with a workmanship warranty.
Should I repair or replace my faucet in Tupelo?
If your faucet is under 10 years old and the body is in good shape, repair is almost always the right call. If it is older, corroded, or you have already repaired it twice in two years, replacement makes more sense. We give you both prices and let you choose.
How much water does a dripping faucet waste?
A dripping faucet wastes about 3,000 gallons (11,350 liters) a year at one drip per second. A fast drip wastes more, and a dripping hot tap raises the water heater bill.
Why is my faucet leaking under the sink?
A faucet leaks under the sink from a loose or failed supply line, a worn faucet base gasket, or a leaking spray hose connection. We tighten or replace the connection and test with the water on.
Why is my faucet pressure low?
Low faucet pressure comes from a clogged aerator, a scaled cartridge, or a partly closed shut-off valve. Low pressure at every fixture points to the main supply or a pressure-reducing valve instead.
Ready when you are
Get your faucet repair Tupelo MS scheduled today
We are licensed, insured, and ready to stop that drip. Call (662) 550-8327 and we will give you an upfront price before we start. Same-day appointments are available in most of Tupelo and Lee County.

Talk with the local team
Request Faucet Repair
Call (662) 550-8327 to reach a live dispatcher. We answer 24/7 for emergencies and book same-day appointments Monday through Friday. If you prefer email, send your address and a description of the problem to info@tupelomsplumbing.com and we will reply with an arrival window.



